(800) 660-8319 
Gavita Pro 6/750e DE Flex Lamp Grow Light Kit, 120/240V
NOTE
This product is selling for a low price on Amazon with which we simply can't compete.
For that reason, we have decided not to carry this product in our catalog and to simply provide you with the link to the product page on Amazon.
Pro Tip: If it is currently discounted, but you're not ready to buy, go ahead and add to cart. That should lock in the low price.
If you prefer to buy from us, we will add the product to our catalog once the price on amazon goes up. You can still read all about the item below.
The Gavita Pro 6/750e DE Flex Lamp HID grow light kit is a double-ended 750 watt light that bridges the gap between a 600 watt and a 1000 watt system. This kit can hang a full foot closer than a 1000 watt system.
If you don't have enough height in your grow room to run a 1000 watt fixture at full power, this is a much better solution than running the 1000w lamp at 750w full-time. Doing that deteriorates the spectrum of the lamp. It can also be dimmed to 600w with very little loss in efficieny. In fact it matches any industry standard 600w lamp.
You can control up to 80 of these units with the Gavita Master Contoller (sold separately here).
Features of the Gavita Pro 6/750e DE Flex Lamp
- Control the output: dim or boost the output depending on your plants' needs (400, 500, 600, 750 or 825 watts)
- Soft dim: reduces stress on the bulb by gradually changing the output when light is switched
- Integrated ballast: attached ballast means no problems with electromagnetic interference
- Gavita Pro 750w DE HPS bulb: 1450 µmol s-1 of light with maintenance of over 96% per 5000 hours; 10 to 25 % more output than standard HPS and only needs to be replaced once a year
- Large coverage: 3 by 4.5 foot coverage area
- Intense light: 1000 mol per second per meter squared over entire coverage area
- Balanced fixture: can be mounted by just two hanging points for much easier installation
- Very high grade Miro aluminum reflector: provides optimal reflectance of light onto plants with uniform light in an overlapping plan and deep penetration
- Status LED: provides information about status of the ballast (shows a starting lamp, end of life, over temperature, input voltage too high or too low, plus memory for alarms)
- 1 year warranty
- Includes 240V cord: 120V cord available for purchase separately
| Power | 750 watts |
|---|---|
| Input Power | 805w at 120V; 801w at 208V; 795w at 240V |
| Input Current | 6.7A at 120V; 3.9A at 208V; 3.5A at 240V |
| Output | 1450 umol/s |
| Coverage | 3 by 4.5 feet |
| Grow Cycle | works for all grow cycles, but best for flowering |
| Warranty | 1 year |
The Gavita Pro 6/750e DE Flex Lamp HID grow light kit is a double-ended 750 watt light that bridges the gap between a 600 watt and a 1000 watt system. This kit can hang a full foot closer than a 1000 watt system.
If you don't have enough height in your grow room to run a 1000 watt fixture at full power, this is a much better solution than running the 1000w lamp at 750w full-time. Doing that deteriorates the spectrum of the lamp. It can also be dimmed to 600w with very little loss in efficieny. In fact it matches any industry standard 600w lamp.
You can control up to 80 of these units with the Gavita Master Contoller (sold separately here).
Features of the Gavita Pro 6/750e DE Flex Lamp
- Control the output: dim or boost the output depending on your plants' needs (400, 500, 600, 750 or 825 watts)
- Soft dim: reduces stress on the bulb by gradually changing the output when light is switched
- Integrated ballast: attached ballast means no problems with electromagnetic interference
- Gavita Pro 750w DE HPS bulb: 1450 µmol s-1 of light with maintenance of over 96% per 5000 hours; 10 to 25 % more output than standard HPS and only needs to be replaced once a year
- Large coverage: 3 by 4.5 foot coverage area
- Intense light: 1000 mol per second per meter squared over entire coverage area
- Balanced fixture: can be mounted by just two hanging points for much easier installation
- Very high grade Miro aluminum reflector: provides optimal reflectance of light onto plants with uniform light in an overlapping plan and deep penetration
- Status LED: provides information about status of the ballast (shows a starting lamp, end of life, over temperature, input voltage too high or too low, plus memory for alarms)
- 1 year warranty
- Includes 240V cord: 120V cord available for purchase separately
| Power | 750 watts |
|---|---|
| Input Power | 805w at 120V; 801w at 208V; 795w at 240V |
| Input Current | 6.7A at 120V; 3.9A at 208V; 3.5A at 240V |
| Output | 1450 umol/s |
| Coverage | 3 by 4.5 feet |
| Grow Cycle | works for all grow cycles, but best for flowering |
| Warranty | 1 year |
