Sun to Fri 9am-7pm ET
Sun to Fri 9am-7pm ET
Discover the most efficient LED grow lights for plants, designed for growers who value durability, low heat, and optimized light output. With the latest LED grow light technology and high efficacy levels (≥2.5 µmol/J), an LED grow light converts power into usable PAR light with minimal waste, helping you hit optimal PPFD targets at every stage—from seedlings to full bloom.
Whether you’re growing leafy greens or light-hungry flowering crops, an LED light offers tunable intensity, long lifespan, and customizable spectrum control; designed for tents, vertical farms, and large-scale grows.
Get the best commercial LED grow lights with our bulk pricing, energy rebates, and grow light comparison all in one place at Grow Light Central.
Achieve high-efficiency indoor growth with 1600 µmol/s output and full-spectrum control for premium bud cultivation. The Fluence SPYDR 2r LED Grow ...
View full detailsDelivers full-spectrum Far Red light with up to 3.23 µmol/J efficiency and three power modes for efficient vertical or hydroponic grows. The GrowPr...
View full detailsOptimize commercial grows with dual-channel LED, waterproof IP66 design, and fast setup for any indoor environment. The Tarantula Explorer is a pow...
View full detailsMaximize growth and efficiency with this LED light designed for even distribution and enhanced flowering. The RAGING Kale II+ is a low-profile, hig...
View full detailsBoost greenhouse yields with this 1000W dual-channel light that delivers powerful, spectrum-adjustable coverage across all seasons and grow stages....
View full detailsHit every layer of your canopy with dual-channel red, white, and infrared lighting to grow bigger buds, speed up flowering, and reduce labor at har...
View full detailsBoost bud quality and increase yields by lighting up the lower canopy with a compact dual-channel system designed for deeper, more uniform flower d...
View full detailsLight up the entire canopy from top to bottom with this 8ft dual-channel fixture that boosts both veg and flower performance using UVA, blue, red, ...
View full detailsPush more light through your canopy layers using this compact 4ft dual-channel fixture built for B-bud boost and consistent growth below the tops. ...
View full detailsFine-tune your spectrum with UV, IR, and full-spectrum dimming for advanced growth control, higher potency, and optimized flowering yield. The Secr...
View full detailsOffering 3 power modes, dual channel spectrum control, 3.1 µmol/J efficiency, and full-spectrum output with UV and Far Red for maximum plant growth...
View full detailsOffering three power modes, UV and Far Red, dual dimming channels, and 3.02 µmol/J efficiency for powerful 4x6 canopy coverage. The Dragrow 4x6 Ful...
View full detailsA commercial-ready LED grow light engineered for controlled intensity, uniform coverage and long term production reliability. This LED grow light i...
View full detailsDominate every stage with this 4-channel, 10-bar LED designed for commercial scale, spectrum control, and fast deployment. The Tarantula Borg Evolu...
View full details5.0 / 5.0
2 Reviews
Maximize growth potential with uniform light distribution, energy efficiency, and seamless control. The RAGING Kale II is a low-profile, high-perfo...
View full details5.0 / 5.0
0 Review
Maximize yields with even light distribution, energy savings, and scalable installation. The DRAGON Alpha III takes precision growing to the next l...
View full details5.0 / 5.0
0 Review
Achieve maximum growth control with customizable spectrums, precise intensity adjustments, and efficient light distribution. The Raging Kush II has...
View full detailsThe actual power use depends on the light’s wattage drawn from the wall, not the advertised number. High-efficiency grow lights typically use 200W to 1000W, depending on the size of your grow space and your plant’s needs. Always check the actual wattage listed in the product specs to know what you're really using.
It depends on the light’s intensity and your coverage goals. Lower hanging heights deliver more intense light to a smaller area, while higher mounting heights spread light across a wider area with less intensity. A common example is hanging your light around 18 inches above the canopy for balanced coverage. Always refer to your light’s PPFD chart for the best results.
Your electricity cost depends on your light’s wattage and daily run time. For example, a 500W LED running 12 hours a day uses about 6 kWh daily. At an electricity rate of $0.15/kWh, that’sroughly $0.90 per day or $27 a month. Check your local energy rates and calculate based on how many hours your lights run.
It’s not about the number of lights per plant but about even light coverage across your grow space. Focus on delivering the right PPFD intensity over your canopy area. A single high-output light can cover a 4’×4’ to 5’×5’ space, supporting several plants. In dense canopies, using multiple lights or under-canopy fixtures ensures even growth from top to bottom.
Yes, we do! Many of the LED grow lights and climate control systems we carry qualify for local, state, and utility energy rebates that help lower upfront costs. To see what rebates you're eligible for, visit our Energy Rebates & Incentives Program page.
I mean, what can I say everything I’ve gotten from Rosineer is awesome so I mean really all I can say top-of-the-line I love it. I love it. You don’t have to hardly put anything on it. To press is so nice once again guys you knock it out of the park. I love it. I guess the only thing I can say is we wish you had your own filteris awesome so I mean really all I can say top-of-the-line I love it. I love it. You don’t have to hardly put anything on it. To press is so nice once again guys you knock it out of the park. I love it. I guess the only thing I can say is we wish you had your own filter bags that matches the block blocks and I have every size thank you so very much and fast shipping.
Came broken and missing pieces but the company was quick to send new foot pads and the missing pieces. Once the company sent correction it was still not possible to put it together as the bolts were not long enough to screw in and there were no instructions. There are two spaces for bolts to hold the leg piece on, the top opening has a drill out to let the bolt pass through and screw in fully, the one below does not, making the bolt too short to touch the body of the equipment.
An excellent piece of machinery, very easy to use, and produces excellent results. Knowing the proper bags to use with the type of product your processing is key to optimal results, so do your research and get the most out of this amazing press!