Sun to Fri 9am-7pm ET
Sun to Fri 9am-7pm ET
Discover the most efficient LED grow lights for plants, designed for growers who value durability, low heat, and optimized light output. With the latest LED grow light technology and high efficacy levels (≥2.5 µmol/J), an LED grow light converts power into usable PAR light with minimal waste, helping you hit optimal PPFD targets at every stage—from seedlings to full bloom.
Whether you’re growing leafy greens or light-hungry flowering crops, an LED light offers tunable intensity, long lifespan, and customizable spectrum control; designed for tents, vertical farms, and large-scale grows.
Get the best commercial LED grow lights with our bulk pricing, energy rebates, and grow light comparison all in one place at Grow Light Central.
Designed for CO2 vertical farms, the FC 1200W EVO delivers 3451 PPFD with Samsung LM301H EVO chips and 2.8 µmol/J efficiency. If you're running hig...
View full detailsFull-spectrum grow light with 2.8 µmol/J PPE, 3360 μmol/s PPF, and smart dimming. Ideal for CO2-enriched setups and large indoor grows. The FC-E120...
View full detailsOptimize commercial grows with dual-channel LED, waterproof IP66 design, and fast setup for any indoor environment. The Tarantula Explorer is a pow...
View full detailsOffering three power modes, UV and Far Red, dual dimming channels, and 3.02 µmol/J efficiency for powerful 4x6 canopy coverage. The Dragrow 4x6 Ful...
View full detailsDelivers true 5 by 5 coverage with commercial-grade output built for growers who demand consistency The LED grow light that finally solves uneven c...
View full detailsA commercial-ready LED grow light engineered for controlled intensity, uniform coverage and long term production reliability. This LED grow light i...
View full detailsDominate every stage with this 4-channel, 10-bar LED designed for commercial scale, spectrum control, and fast deployment. The Tarantula Borg Evolu...
View full detailsDominate every grow stage with 4760 PPF and four-channel spectrum control from 1,800K to 18,000K. If you're running high-performance rooms or verti...
View full details1000 W LED outperforms 1200 W DE HPS with 2125 µmol/s and full‑spectrum Phyto‑Genesis technology for max output. The Black Dog LED PhytoMAX-4 16S i...
View full details1250 W full‑spectrum LED delivers 2657 µmol/s and 8‑wavelength Phyto‑Genesis Spectrum for elite commercial yields. The Black Dog LED PhytoMAX-4 20S...
View full details1500 W full spectrum LED delivers 3188 µmol/s with eight wavelength Phyto Genesis Spectrum for elite cultivation. Meet the powerhouse of the PhytoM...
View full detailsBoost large grow spaces with a powerful 12-bar LED that delivers 3600 µmol/s PPF, smart controls, and foldable design. The Medic Grow Fold-1200 is ...
View full detailsA true 1000W HPS replacement LED grow light with adjustable side bar angles engineered to match legacy spectrum while improving efficiency and cano...
View full details4 independently controllable channels spanning 1,800K to 18,000K, giving you precise spectrum manipulation throughout the entire lifecycle. The Tar...
View full detailsThe actual power use depends on the light’s wattage drawn from the wall, not the advertised number. High-efficiency grow lights typically use 200W to 1000W, depending on the size of your grow space and your plant’s needs. Always check the actual wattage listed in the product specs to know what you're really using.
It depends on the light’s intensity and your coverage goals. Lower hanging heights deliver more intense light to a smaller area, while higher mounting heights spread light across a wider area with less intensity. A common example is hanging your light around 18 inches above the canopy for balanced coverage. Always refer to your light’s PPFD chart for the best results.
Your electricity cost depends on your light’s wattage and daily run time. For example, a 500W LED running 12 hours a day uses about 6 kWh daily. At an electricity rate of $0.15/kWh, that’sroughly $0.90 per day or $27 a month. Check your local energy rates and calculate based on how many hours your lights run.
It’s not about the number of lights per plant but about even light coverage across your grow space. Focus on delivering the right PPFD intensity over your canopy area. A single high-output light can cover a 4’×4’ to 5’×5’ space, supporting several plants. In dense canopies, using multiple lights or under-canopy fixtures ensures even growth from top to bottom.
Yes, we do! Many of the LED grow lights and climate control systems we carry qualify for local, state, and utility energy rebates that help lower upfront costs. To see what rebates you're eligible for, visit our Energy Rebates & Incentives Program page.
These work great and being able to buy in bulk beats the heck out of Amazon pricing.
its ok i don't think its worth the money i only got 150 more par over a 600 watt 6 bar light
I mean, what can I say everything I’ve gotten from Rosineer is awesome so I mean really all I can say top-of-the-line I love it. I love it. You don’t have to hardly put anything on it. To press is so nice once again guys you knock it out of the park. I love it. I guess the only thing I can say is we wish you had your own filteris awesome so I mean really all I can say top-of-the-line I love it. I love it. You don’t have to hardly put anything on it. To press is so nice once again guys you knock it out of the park. I love it. I guess the only thing I can say is we wish you had your own filter bags that matches the block blocks and I have every size thank you so very much and fast shipping.
Came broken and missing pieces but the company was quick to send new foot pads and the missing pieces. Once the company sent correction it was still not possible to put it together as the bolts were not long enough to screw in and there were no instructions. There are two spaces for bolts to hold the leg piece on, the top opening has a drill out to let the bolt pass through and screw in fully, the one below does not, making the bolt too short to touch the body of the equipment.