Shop All Grow Lights

An easy to install mounting bracket, designed to fit in multiple orientations on fixtures that allow for fixtures to be pivoted. The Gavita V2 Hang...

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita...

The Gavita Pro 600e single ended HID grow light kit is a plug and play installable kit that includes a reflector, a 600 watt e-series ballast and t...

The Gavita Pro 6/750e DE Flex Lamp HID grow light kit is a double-ended 750 watt light that bridges the gap between a 600 watt and a 1000 watt syst...

This Gavita master controller gives you complete control over up to 40 Gavita ballasts. The EL1 has one output channel making it suitable for one r...

This Gavita master controller gives you complete control over up to 80 Gavita ballasts. The EL2 has two output channels plus additional outputs for...

The Gavita Pro 1000e double ended HID grow light kit is a plug and play installable kit that includes a reflector, a 1000 watt e-series ballast and...

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best f...

Gavita Interconnect Cable for Repeater Bus Gray Gray interconnect cables used for Gavita fixtures that are equipped with double RJ connectors also...

3-way splitter with 6P6C connection jacks. This is a 4 piece kit.

These 2 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes: 1 - long bracket 1-...

Pair of eyebolts with M6 hex nuts to hang your Gavita lighting fixtures. Pair of eyebolts with M6 hex nuts to hang your Gavita lighting fixtures. I...

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP...

Gavita Wieland Mains Power Cords Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be...

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita...

Gavita LED Brackets for the Gavita Pro 1700e LED 120-277 Volt.

Gavita Repeater Bus Connection Kit The Gavita repeater bus connection kit is the Gavita Cabling kit for custom installation. Repeater Bus accessor...

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 9060...

Use these cables as a replacement or an extension for the temperature probe on the Gavita Master Controller EL1 and EL2. Choose from 16 ft/5 m or 9...

These upgraded 3 ft/1 m 277 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 9060...

Gavita E-Series LED Adapter Interconnect Cable 10ft RJ45 to RJ45.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. U...

8 ft Power Cord for Gavita Pro 900e LED 120-277V.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. U...

Gavita E-Series LED Adapter - 120 - 277 Volt including the cable RJ45-RJ45/6 Ft for the Gavita Pro 900e LED 120-277V.

Gavita E-Series LED Adapter Interconnect Cable 10ft Cable RJ45 to RJ9.

Gavita E-Series LED Adapter Interconnect Cable 25ft Cable RJ45 to RJ9.

Gavita E-Series LED Adapter & Cables The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inl...

Gavita E-Series LED Adapter & Cables The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inl...

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best f...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. U...

Titan Controls™ Grow Room Sensors The Titan Controls™ grow room sensors are designed for the grower in mind. For use with the Gavita™ EL3 Contr...

Gavita 8 ft Power Cord 277-400 Volt for Gavita CT1930e LED 347-480V.

Gavita E-Series LED Adapter & Cables The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inl...

These 1-5/8 inch bracket assembly kits are used to hang your Gavita fixture on a unistrut or rail system. A single kit includes: 1- long bracket...

Get ready to enjoy unparalleled control with the Gavita Master Controller EL3! This next-generation tool is specifically designed to optimize your ...