EZ TRIM Satellite Bud Trimmer

If you are looking to truly upgrade your hemp production the Satellite Bud Trimmer by EZTRIM is exactly what you are looking for. When it comes to bud trimming there is no better machine as the Bud Trimmer features multiple settings to allow for not only wet and dry trimming but also can be set depending on strain and size!

This Trimmer and its satellite style uses air flow and silicone “fingers” to move the product constantly turning the bud so all sides are trimmed. The grate on the bottom allows for the trimming blade to give the product a consistent trim as it is tossed around within the tumbler. You also get the ability to change the grate out for both wet and dry. Another key feature is the top of the Bud Trimmer is translucent allowing for the user to easily watch and time the batch to ensure that everything comes out consistent.

But what happens to all the trimmings you ask? Well the Bud Trimmer has an amazing filtration system under the machine that allows for the collection of various micron levels of leaf trimmings. It uses four collection bags with different levels collecting a different product. The first level is for larger leaves and stems. The second is for sweet leaf which can be used in extraction and also pre-rolls. The last two levels three and four collect keif with B grade keif being in level three and A grade in four. You can even manually dry sift using these bags even while it is not attached to the machine!

With the Bud Trimmer you are looking at an average of 44 LBS of wet trimming and 33 LBS of dry trimming per hour saving on both employees and time!

This machine will cut down on so much time and is an amazing tool to have in your shop.

Key Features:

• Unique satellite style tumbler to save on space
• Utilizes both airflow and silicone “fingers” to keep the product moving
• Changeable grate so both wet and dry product get a consistent trim
• Adjustable settings to accommodate various strains and sizes
• 4 differentiating micron filtration bags to separate trimmings into:
• Large leaves and stems
• Sweet leaf
• B grade keif
• A grade keif
• Lightweight metal allowing for easy movement
• Ability to trim 44 LBS wet or 33 LBS dry per hour

Specifications:

• Input Voltage: 120 VAC; 60 HZ; Single Phase
• Power Draw: 10 Amps; 1200 Watts
• Weight: 85 lbs
• Length: 32 inches
• Width: 43 inches
• Height: 43 inches
• Production (Single User): 20-30 lbs./hr. (Wet in wet weight, dry in dry weight)

Bud Trimming - Wet & Hybrid Trim Method

• Proper preparation is key to quality trimming, individualize all buds, remove all fan leaves and keep no more than an 1/8” to 1/4 “of stem at the base of the buds
• There is a balance of quality and speed for every strain, some strains require zero touch up, while others need some, find the optimal trimming cycle time and touch up required that creates the best quality and efficiency
• Dialing in the blade to its closest point is crucial to getting a tight quality trim
• Having extra blades, grates and filtration bags can provide a quick swap out solution for maintaining a clean unit
• Multiple Bud Trimmers provide advantages to a single larger trimmer:
  • 1 person can easily operate 4 Bud Trimmers
  • Redundancy
  • Trim multiple strains simultaneously
  • Adjust the trimming dynamics as needed for different strains and moisture levels
• Batch sizes should be 400 – 600 grams of fresh flower, and batch times should be 1-2 minutes
• Average throughput for every Bud Trimmer should be 20,000 grams (44 LBS) per hour of fresh buds or 5,000 grams (11 LBS) per hour of dried finished buds
• For clients that prefer hand trimming and hang drying or smaller operations that don’t need the capacity of the Bud Trimmer we offer the Wander Trimmer for fast and efficient trimming of your wet product.

Bud Trimming - Dry Method

• Proper preparation is key to quality trimming, individualize all buds, remove all fan leaves and keep no more than an 1/8” to 1/4 “of stem at the base of the buds
• The most important aspect of dry trimming is moisture level in the buds. Too much and it won’t trim, too little and the buds will become fragile
• Dry trimming hemp and hemp buds is done through friction, not cutting
• We recommend checking for dryness by disturbing one of the outer leaves, if it bends it is not dry enough. The leaves need to snap when disturbed.
• It is crucial that the product is dried and prepped properly prior to trimming, this means, all the buds have been individualized, and that the outer leaves snap, and do not bend at all when disturbed
• Remove the cutting blade when dry trimming to avoid mincing the trim too small
• Batch sizes should be 300 – 400 grams of dried buds, and batch times should be 30 sec to 1 minute
• Average throughput for every Bud Trimmer should be 15,000 grams (33 LBS) per hour of dried finished buds

A Complete information PDF can be found here.

- Free Shipping on all orders $175+ in the continental US.*
- Tracking Info will be provided via email within 24 hours of shipment.
- All Sales Final. No Returns.
- Please see our Shipping & Returns policy for more details.


Warranty Information
EZ-TRIM purchases do not include a warranty.