Grow Light Cables & Hangers

Use these cables as a replacement or an extension for the temperature probe on the Gavita Master Controller EL1 and EL2. Choose from 16 ft/5 m or 9...

The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and controlled from a centralized location. The rugge...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. U...

PHOTOBIO X White Cable Harness Designed for use with Phantom PHOTOBIO LED fixture models CX, MX, T and TX.This "plug & play" harness provides t...

PHOTOBIO VP White Cable Harness, 10' These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture lev...

PHOTOBIO VP 18” Power Link Cable, 18AWG These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixtu...

PHOTOBIO V 277V Harness These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducin...

PHOTOBIO PHOTO LOC 0-10V Control Cable, 3P-2P, Ferrite, 18AWG, 300' The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be ...

PHOTOBIO PHOTO LOC 0-10V Control Cable 16’ Jumper The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and ...

Smarter, Simpler, Safer, Significant Savings… The 40 AMP PHOTOBIO AC Power Distribution Tree enables multiple LED fixtures to be daisy chained fr...

Smarter, Simpler, Safer, Significant Savings… The 40 AMP PHOTOBIO AC Power Distribution Tree enables multiple LED fixtures to be daisy chained fr...

Smarter, Simpler, Safer, Significant Savings… The 40 AMP PHOTOBIO AC Power Distribution Tree enables multiple LED fixtures to be daisy chained fro...

PHOTOBIO LOC 0-10V Control Cable 8' Trunk + 5' Branch The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected ...

PHOTOBIO Mini 3P(M) to Mini 3P(F) WT Data Link Cable, 20 ft. 20' Mini 3P(M) to Mini 3P(F) WT data link cable, IP65, RF. Intended to connect Autopi...

Gavita E-Series LED Adapter & Cables The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inl...

Titan Controls™ Grow Room Sensors The Titan Controls™ grow room sensors are designed for the grower in mind. For use with the Gavita™ EL3 Contr...

Gavita E-Series LED Adapter & Cables The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inl...

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best f...

Gavita E-Series LED Adapter & Cables The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inl...

Gavita E-Series LED Adapter Interconnect Cable 25ft Cable RJ45 to RJ9.

Gavita E-Series LED Adapter Interconnect Cable 10ft Cable RJ45 to RJ9.

Gavita E-Series LED Adapter - 120 - 277 Volt including the cable RJ45-RJ45/6 Ft for the Gavita Pro 900e LED 120-277V.

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. U...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. U...

Gavita E-Series LED Adapter Interconnect Cable 10ft RJ45 to RJ45.

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita...

Gavita Interconnect Cable for Repeater Bus Gray Gray interconnect cables used for Gavita fixtures that are equipped with double RJ connectors also...

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita...