iPower 6 Inch Air Cooled Hood Reflector
NOTE
This product is selling for a low price on Amazon with which we simply can't compete.
For that reason, we have decided not to carry this product in our catalog and to simply provide you with the link to the product page on Amazon.
Pro Tip: If it is currently discounted, but you're not ready to buy, go ahead and add to cart. That should lock in the low price.
If you prefer to buy from us, we will add the product to our catalog once the price on amazon goes up. You can still read all about the item below.
Cool hood reflectors like this one from iPower are give you the most intense light for the deepest possible canopy penetration. They also allow you to vent air directly over the bulb, keeping excess heat away from your plants.
The main drawbacks of a cool hood reflector are a smaller coverage area (up to 4 by 4 feet) and a higher purchase price than most other reflectors. This reflector is also available in a larger size that has 8-inch vents and gives you a 6 x 6 foot coverage area.
Features of the iPower Air Cooled Hood Reflector with 6-Inch Vents
- 23 x 17 x 9 inches: up to a 4' x 4' coverage area with a very focused light (i.e. deep canopy penetration)
- Works with a 250w, 400w, 600w, 1000w HPS / MH grow light system
- Built-in 15-ft heavy duty lamp cord (UL Listed) with an E39 ceramic mogul socket and a standard hydroponic S-plug: compatible with all systems except Hydrofarm (not sure they insist on using their own plugs)
- 0.4 mm highly 95% reflective textured German aluminum: intensifies the light and enlarges the lighting area
- 6-inch air duct: allows air to pass easily through the tube to cool the bulb and keep excessive heat away from your plants
- V-hook hangers included
Cool Hood Reflector
Power | 250, 400, 600 or 1000 watts |
---|---|
Type of Bulb | HPS and MH, single ended |
Weight | 12.9 lbs |
Dimensions | 24 by 17 by 8.5 inches, with 6-inch vents |
Cool hood reflectors like this one from iPower are give you the most intense light for the deepest possible canopy penetration. They also allow you to vent air directly over the bulb, keeping excess heat away from your plants.
The main drawbacks of a cool hood reflector are a smaller coverage area (up to 4 by 4 feet) and a higher purchase price than most other reflectors. This reflector is also available in a larger size that has 8-inch vents and gives you a 6 x 6 foot coverage area.
Features of the iPower Air Cooled Hood Reflector with 6-Inch Vents
- 23 x 17 x 9 inches: up to a 4' x 4' coverage area with a very focused light (i.e. deep canopy penetration)
- Works with a 250w, 400w, 600w, 1000w HPS / MH grow light system
- Built-in 15-ft heavy duty lamp cord (UL Listed) with an E39 ceramic mogul socket and a standard hydroponic S-plug: compatible with all systems except Hydrofarm (not sure they insist on using their own plugs)
- 0.4 mm highly 95% reflective textured German aluminum: intensifies the light and enlarges the lighting area
- 6-inch air duct: allows air to pass easily through the tube to cool the bulb and keep excessive heat away from your plants
- V-hook hangers included
Cool Hood Reflector
Power | 250, 400, 600 or 1000 watts |
---|---|
Type of Bulb | HPS and MH, single ended |
Weight | 12.9 lbs |
Dimensions | 24 by 17 by 8.5 inches, with 6-inch vents |